Douglas Olsen
The FE Exam, also known as the EIT Exam (Engineer In Training Exam) or the EI Exam (Engineering Intern Exam), is primarily offered in the United States but is also available for international students through the National Council of Examiners for Engineering and Surveying (NCEES). The NCEES has partnered with Pearson VUE testing centers to offer the FE exam in various countries, allowing candidates from around the world to take the exam without having to travel to the United States. The availability of the FE Exam for international students may vary, and it is important to check with the NCEES directly for the most current information regarding international testing locations, fees, and scheduling. Before applying for the exam, international students should ensure their eligibility by checking if their program is accredited by ABET or another acceptable entity. Most U.S. licensing boards require candidates to have their academic credentials evaluated through services like the NCEES Credentials Evaluations, which compares a candidate's academic background to established criteria.
| Characteristics | Values |
|---|---|
| Exam Name | FE Exam (also referred to as EIT Exam or EI Exam) |
| Administering Body | National Council of Examiners for Engineering and Surveying (NCEES) |
| International Availability | Available internationally through partnerships with Pearson VUE testing centers |
| Eligibility | ABET-accredited program or evaluation of academic credentials through NCEES Credentials Evaluations ($350) |
| State Requirements | Vary by state, with some states requiring verification of education details prior to the exam |
| Application Process | Submit application and/or pay an application fee to the relevant entity, then register with NCEES |
| Results | Reported as pass or fail, with a diagnostic report provided in case of failure |
| Retake Policy | Fees are non-refundable after the registration deadline, and a $50 processing fee is deducted from refunds |
Explore related products
What You'll Learn
Check if you meet the eligibility criteria
To check if you meet the eligibility criteria for the FE exam as an international student, there are a few key steps to follow. Firstly, it is important to understand that the FE exam is primarily offered in the United States, but it is also available internationally through Pearson VUE testing centres that have agreements with the National Council of Examiners for Engineering and Surveying (NCEES). The availability of the FE exam for international students may vary, so it is recommended to check with the NCEES directly for the most current information on international testing locations, fees, and scheduling.
The eligibility criteria for the FE exam can vary depending on the state and the specific requirements of the licensing board. However, there are some general guidelines that can help you determine your eligibility. Firstly, international licensure candidates typically need to have their academic credentials evaluated by the NCEES Credentials Evaluations service or another acceptable entity. This is because most international degrees are not accredited by EAC/ABET, which is recognised by US licensing boards. The cost of having your degree evaluated through the NCEES is $350, and this evaluation will be an essential part of your application.
In addition to the degree evaluation, there are specific requirements for your degree program. Your program should be accredited by ABET, which is the accrediting body for engineering programs. If your program is not accredited by ABET, you may need additional years of progressive engineering experience to be eligible for the FE exam. For example, in Texas, EAC/ABET, ETAC/ABET, engineering-related, and non-engineering-related programs can lead to eligibility, but with additional verification requirements. Therefore, checking the accreditation status of your program is crucial.
Furthermore, some states may have specific requirements regarding your field of study. For example, if you are applying with a science background, most states will only accept a bachelor's degree accredited by the Engineering Accreditation Commission (EAC/ABET) rather than the Technology Accreditation Commission (TAC/ABET). Additionally, some states may require you to be in your last semester of a specific engineering program, such as environmental engineering, to be eligible for the FE exam.
Lastly, the board you are applying to will evaluate your transcripts before giving you approval to take the exam. Therefore, it is recommended to submit your application and then act accordingly based on their response. It is important to note that each state may have unique eligibility requirements, so checking the specific requirements of your intended state is essential.
International Students' Mindsets: A Global Perspective
You may want to see also
Explore related products
![Samsung Galaxy Buds FE True Wireless Bluetooth Earbuds, Comfort and Secure in Ear Fit, Auto Switch Audio, Touch Control, Built-in Voice Assistant, Graphite [US Version, 1Yr Manufacturer Warranty]](https://m.media-amazon.com/images/I/613cPuOz5OL._AC_UY218_.jpg)
Find your nearest Pearson VUE testing centre
To find your nearest Pearson VUE testing centre, you can visit the Pearson VUE Find a Test Centre page and enter your address to find test centres near you.
The National Council of Examiners for Engineering and Surveying (NCEES) administers the FE Exam and has authorized Pearson VUE testing centres in various countries, allowing candidates from around the world to take the exam. The NCEES has partnered with Pearson VUE to offer the FE exam internationally. If there is a Pearson VUE test centre offering NCEES exams in your country or a nearby country, you can take the FE exam there.
The availability of the FE Exam for international students is subject to change, and there may be additional requirements or restrictions for international test-takers. Therefore, it is important to check with the NCEES directly for the most current information regarding international testing locations, fees, and scheduling.
Before registering for the FE Exam as an international student, it is important to ensure your eligibility. You can do this by first checking if your program is ABET-accredited. If your program is accredited, the application process should be straightforward. However, if your program is not accredited, you may need to complete additional steps, such as having your academic credentials evaluated through NCEES Credentials Evaluations or another acceptable entity. The current cost of having your degree evaluated through NCEES is $350, which is paid at the end of the application process.
UCI: International Student Sponsorship Options
You may want to see also
Explore related products
Understand the application process
The FE Exam, also known as the EIT Exam (Engineer In Training Exam) or the EI Exam (Engineering Intern Exam), is primarily offered in the United States but is also available for international students. The exam is administered by the National Council of Examiners for Engineering and Surveying (NCEES), which has partnered with Pearson VUE testing centers to offer the exam internationally.
To apply for the FE Exam as an international student, you should first check if you meet the eligibility requirements. Most U.S. licensing boards require candidates to have their academic credentials evaluated through NCEES Credentials Evaluations or another acceptable entity. This is because international licensure candidates typically have degrees from programs that are not accredited by EAC/ABET. The current cost of having your degree evaluated through NCEES is $350, which will be paid at the end of the application process.
Once you have confirmed your eligibility, you can proceed with the application process. The specific steps may vary depending on your location and the licensing board you are applying to. However, here is a general overview of the application process:
- Find an approved testing center: The NCEES has partnered with Pearson VUE testing centers to offer the FE Exam internationally. Check if there is a Pearson VUE test center that offers NCEES exams in your country or a nearby country.
- Contact the testing center: Reach out to the Pearson VUE testing center or the relevant local entity to inquire about their specific application process, requirements, and fees.
- Submit your application: Gather the required documents, complete the application form, and submit your application to the testing center or licensing board. This may include providing transcripts, verifying your education details, and paying any applicable fees.
- Wait for approval: After submitting your application, wait for approval from the testing center or licensing board. They will evaluate your transcripts and credentials before giving you final approval to sit for the test.
- Schedule your exam: Once you have received approval, you can proceed to schedule your exam. Contact the testing center or licensing board to register and select your exam date and location.
- Prepare for the exam: Familiarize yourself with the exam format, syllabus, and any other relevant information provided by the NCEES or the testing center. This will help you effectively prepare for the FE Exam.
It is important to note that the availability of the FE Exam for international students may change, and there could be additional requirements or restrictions for international test-takers. Therefore, it is recommended to check directly with the NCEES or the relevant testing center for the most current information regarding international testing locations, fees, and scheduling procedures.
Estimating Costs: International Student Guide to Affording University
You may want to see also
Explore related products
Prepare for the exam
Preparing for the Fundamentals of Engineering Exam is not a simple task. It is important to have personal coaching, mentoring, and accountability in place to smooth out the struggles, doubts, and uncertainties that may arise. It is also recommended that you take the FE exam as soon as possible, as the exam tends to become significantly more difficult for people who have been out of school for a year.
Before you begin preparing for the exam, you should ensure that you are eligible to take it. The requirements to take the exam are determined by each state, and most states will evaluate your transcripts before giving you approval to sit for the test. For example, in Ohio, you must verify your education details before getting the exam date, while in Florida, you only need to verify your degree once you have passed the exam.
Once you have confirmed your eligibility, you can begin preparing for the exam. One option is to seek out a coaching service such as Prepineer, which offers a proven system of coaching and material review to help students study for and pass the FE Exam. Alternatively, you can prepare on your own by taking practice exams and utilizing other resources. NCEES offers interactive practice exams and e-book practice exams that can help you familiarize yourself with the exam format and content.
In addition to practicing with sample questions, it is important to review the exam specifications and reference handbook to ensure you are preparing with the most up-to-date information. The FE exam is a computer-based exam offered year-round at NCEES-approved Pearson Vue test centers, and you can take it up to three times per year. The exam fee is typically $250, but it may vary depending on the location and other factors.
International Students: Eligibility for Federal Student Loans
You may want to see also
What to do after the exam
After passing the FE exam, there are several steps you can take to further your career. Here is a list of things to do after passing the FE exam:
Submit an application to the relevant state board
First, visit the website of the National Council of Examiners for Engineering and Surveying (NCEES) and submit an application to the state board where you want to be certified to receive your Engineer-in-Training (EIT) certification officially. Application criteria may differ across states, but they generally involve examination results, identification, completion dates, references, and evidence of your degree.
Prepare for the PE exam
After receiving your EIT certification, start preparing for the Principles and Practice of Engineering (PE) exam. This exam is required for licensure as a Professional Engineer. You can browse test prep materials and select the exam in the area that pertains to you.
Gain work experience
While preparing for the PE exam, you can simultaneously gain the required engineering experience. As an EIT, you will need to work under the supervision of a registered professional engineer. This experience will count towards the four years of engineering practice required for the PE license.
Establish contacts with other engineers
Networking is an essential step in your journey to becoming a professional engineer. Build linkages with other engineers through social media platforms like LinkedIn or by following engineering-related forums. The NCEES requires you to attest your experience from licensed engineers to attain the PE license.
Explore career paths
As you progress through these steps, it is beneficial to explore the various types of engineering careers and choose the right discipline for your future path. You can also look into scholarships, grants, and groups that support individuals in STEM careers, such as engineering and architecture.
Student Interns: Conference Leaders?
You may want to see also
Frequently asked questions
The FE exam, also known as the EIT Exam (Engineer In Training Exam) or the EI Exam (Engineering Intern Exam), is a national exam that is the same in all 50 states in the US. It is administered by the National Council of Examiners for Engineering and Surveying (NCEES).
The NCEES has partnered with Pearson VUE testing centres to offer the FE exam internationally. You can take the exam at a Pearson VUE test centre that offers NCEES exams in your country or a nearby country. Before applying, you should check the eligibility requirements, as each state has its own requirements.
Most US licensing boards require candidates to have their academic credentials evaluated through NCEES Credentials Evaluations or another acceptable entity. The current cost of this evaluation is $350. Additionally, most states only accept bachelor's degrees accredited by the EAC/ABET Engineering Accreditation Commission.
After ensuring that you meet the eligibility requirements, you can register for the exam through your MyNCEES account. You will need to select your exam location and choose from the available exam dates. There may be an application fee, depending on the location.
